Basic Information and History

Do you want to own something no one else has? Here’s your chance to buy a one-off masterpiece: a 2016 AJDÉN MK II ÖV – hand-built Bentley EXP Speed 8 replica. This is more than just a car – it’s the result of years of passion, engineering, and uncompromising craftsmanship. Every detail has been carefully considered, from the CAD- and FEM-simulated chassis to the custom-built suspension and the brutal engine package delivering nearly 500 horsepower.

This project started as a degree thesis in automotive systems engineering but grew into a fully-fledged track and street car, built with the same determination as a factory project. The entire journey from drawing board to finished car is documented in an epic build thread on Rejsa.nu:

🔗 Follow the build from start to finish here

With 5,718 km on the odometer, a single previous owner, and a recently approved inspection, this is a unique opportunity. The car has been featured in Bilsport magazine (Issue No.6, 2017) and is well-known on Swedish car forums – a true conversation piece wherever you go. The body has been recently repainted at the rear, the polycarbonate windows are sapphire-coated, and the paintwork is in fine condition (see photos). This is a car that both looks and performs like nothing else you’ve ever encountered on the street.

Equipment and Specifications

Engine & Drivetrain

1. Audi RS6 V8 (BRV) – 495 hp / 670 Nm
2. Mitsubishi 20t turbocharger
3. Custom titanium exhaust system
4. Megasquirt 3 Pro ECU
5. Water-cooled intercooler
6. Audi A6 01E gearbox (FWD)
7. Quaife Torsen differential
8. BMW M5 CV joints & custom drive shafts
9. Sachs 765 servo-assisted racing clutch

Brakes

1. Wilwood 355.6 mm discs
2. Alcon 6-piston calipers
3. AP master cylinder
4. Adjustable balance bar
5. Dual brake servos

Suspension & Steering

1. AVO coilovers with hydraulic ride height adjustment (+10 cm)
2. Ford Sierra steering rack
3. Opel Corsa D electric power steering
4. Custom suspension: Audi front, Ford Scorpio rear

Wheels & Tires

1. 18” OZ Racing, 10” front / 12” rear
2. Hankook Ventus S1 Evo 3, 265/35 ZR18 front and 315/30 ZR18 rear (almost new)

Chassis

1. TIG-welded tubular frame
2. Integrated roll cage
3. Powder-coated for maximum durability

Interior

1. Alcantara door panels and roll cage padding
2. Flocked dashboard
3. Digidash
4. Rear-view camera
5. Fire extinguisher
6. Quick-release steering wheel
7. Tillett-inspired fiberglass seats (adjustable driver’s seat)

Exterior

1. Fiberglass body inspired by Bentley EXP Speed 8
2. Carbon fiber spoiler
3. HELLA headlights
4. Plywood undertray – just like real Le Mans prototypes
5. Headlights for left-hand traffic included

Condition

Body

1. Excellent condition – especially for such an advanced home build (minor marks, see photos)
2. Recently repainted rear section, only minor scratches and stone chips up front
3. Sapphire-coated polycarbonate windows without scratches
4. Lights and trim in top condition

Interior

1. Alcantara and flocked dash in very good condition
2. Slight discoloration on floor mats, a few minor scratches on seats (purely cosmetic)
3. No headliner, instead Alcantara-covered roll cage padding – track ready

Wheels & Tires

1. Nearly new Hankook tires (approx. 100 km)
2. Minor cosmetic damage on one wheel

Mechanics

1. Engine recently serviced and tuned – delivering approx. 495 hp / 670 Nm
2. Clutch and brakes in very good condition
3. Perfectly balanced for both road and track use

Service History

1. Regularly serviced by the builder himself
2. Timing belt, water pump, spark plugs, and thermostat replaced approx. 4,000 km ago
3. Annual oil changes, most recent approx. 50 km ago
4. Inspected and approved on 2024-08-06
5. Service book filled in (all work performed by the owner)

Summary

This is not just a car – it is a passionate engineering project turned into reality. The AJDÉN MK II ÖV is a Bentley EXP Speed 8 replica combining low weight, extreme performance, and a design language that is guaranteed to turn heads. With nearly 500 horsepower, advanced chassis engineering, and a fully documented build process, this is a once-in-a-lifetime opportunity for someone who wants to drive, be seen, and own something literally no one else has.